Changing The Midi Transmit Channel; Panic - Kurzweil Forte Manual

Program Mode

Changing the MIDI Transmit Channel

Changing the MIDI Transmit Channel
The current MIDI Transmit channel is shown on the right side of the top line of the display.
Press the Channel / Zone Up or Down buttons to change the MIDI Transmit channel. A
different Program can be selected for each MIDI Channel. All channels can be triggered
simultaneously from an external MIDI sequencer or computer. The Aux FX Chains of the
Program on the currently selected MIDI Channel are used for Programs on all Channels.
Pressing both Channel / Zone Up and Down buttons at the same time will reset the current
MIDI Transmit channel to 1.

Panic

Pressing the Keypad & Enter buttons simultaneously deactivates all sounding notes and
resets controller values by sending an "All Notes Off " message and a "Reset All Controllers"
message on all 16 MIDI channels.
6-18