The Params Page; Params Page Parameters; Parameter - Kurzweil Forte Manual

Program Edit Mode

The PARAMS Page

The PARAMS Page

PARAMS Page Parameters

Press the PARAMS soft button to display the PARAMS page (see above.)
The PARAMS page allows you to access all of the controllable parameters for the current
The Parameters page shows a list of every parameter in the current program that has been
assigned to be controlled by one of the Forte's physical controllers (or by an external MIDI
CC number). The Parameters page allows you to select a different controller assignment, set
an initial MIDI value for each controller assignment, and edit the name displayed for each
controller assignment (names can be edited when Global User Type is set to Advanced). All
VAST, KB3 and FX parameters that have been assigned to a controller or MIDI CC number
are shown. When controller or MIDI assignments are made on other Program or FX Edit
pages, or if an FX Chain is selected which contains controller assignments, these parameters
are automatically added to the Parameters page.

Parameter

The Parameter (left) column shows a list of every VAST parameter in the current program
that has been assigned to be controlled by one of the Forte's physical controllers (or by an
external MIDI CC number). Effect Chain parameters are named with prefixes based on their
effect type, either "INS" for parameters from Insert effects, "LFX" for parameters from layer
effects, or "AUX1/AUX2" for parameters from Aux effects.
Use the navigation buttons to move up and down in the list. To quickly find a parameter that
is already assigned to a controller, select the parameter column, hold the Enter button and
move a controller to jump to it's assigned parameter.
7-10
Parameter
Parameter Program / Effect Chain dependent
Control Physical controller or MIDI CC
Value
Range Of Values
None, 0 to 127
Default Value
-
None
None