The Common Page; Common Page Parameters; Bendrange Up & Bendrange Down - Kurzweil Forte Manual

Program Edit Mode

The COMMON Page

The COMMON Page
The Common Page allows adjustment of a number of general parameters for the program.
Notice that when the Monophonic parameter is set to its default value of Off, the four
monophonic parameters do not appear on the page. Some global parameters will only appear
when the global
BendRange Up
BendRange Down
Output Gain
Category
Intonation Map
Intonation Key
Monophonic
Legato
Portamento
Portamento Rate
Mono Sample XFade

COMMON Page Parameters

BendRange Up & BendRange Down
Use these parameters to define how much the pitch will change when you move the Pitch
Wheel. You can set either Bend parameter to bend by up to 72 half-steps up or down. Pitch
values are set in cents, where 100 cents = 1 half-step (1 semitone).
7-18
User Type is set to Advanced.
Parameter
-7200 cents to +7200 cents
-7200 cents to +7200 cents
-96 to 24dB
None, 20 Categories
0-127
C - B
Off, On
Off, On
Off, On
1-3000 Key/s
Off, On
Range Of Values Default Value
200 ct
-200 ct
0dB
per program
None (0)
C
Off
On
On
70 Key/s
On