Alert Email - D-Link DFL-500 User Manual

Sample SNMP configuration
Type in a name for this DFL-500.The system name can be up to 31 characters long and can contain,
System Name
numbers (0-9), upper and lower case letters (A-Z, a-z), and the special characters - and _. Spaces
and the \ < > [ ] ` $ % & characters are not allowed.
Describe the physical location of the DFL-500. The system location description can be up to 31
System
characters long and can contain spaces, numbers (0-9), upper and lower case letters (A-Z, a-z), and
Location
the special characters - and _. The \ < > [ ] ` $ % & characters are not allowed.
Add the contact information for the person responsible for this DFL-500. The contact information can
Contact
be up to 31 characters long and can contain spaces, numbers (0-9), upper and lower case letters (A-
Information
Z, a-z), and the special characters - and _. The \ < > [ ] ` $ % & characters are not allowed.
Also called read community, get community is a password to identify SNMP get requests sent to the
DFL-500. When an SNMP manager sends a get request to the DFL-500, it must include the correct
get community string.
The default get community string is "public". Change the default get community string to keep
intruders from using get requests to retrieve information about your network configuration. The get
Get Community
community string must be used in your SNMP manager to enable it to access DFL-500 SNMP
information.
The get community string can be up to 31 characters long and can contain spaces, numbers (0-9),
upper and lower case letters (A-Z, a-z), and the special characters - and _. The \ < > [ ] ` $ % &
characters are not allowed.
The trap community string functions like a password that is sent with SNMP traps.
The default trap community string is "public". Change the trap community string to the one accepted
Trap
by your trap receivers.
Community
The trap community string can be up to 31 characters long and can contain spaces, numbers (0-9),
upper and lower case letters (A-Z, a-z), and the special characters - and _. The \ < > [ ] ` $ % &
characters are not allowed.
Trap Receiver
Optionally type in the IP addresses of up to three trap receivers on your network configured to receive
IP Addresses
traps from your DFL-500. Traps are only sent to the configured addresses.

Alert email

You can configure the DFL-500 to send email alerts to up to three email addresses when the NIDS detects an
attack.
DFL-500 User Manual
126