Administration; Logging Into The Web-Based Manager - D-Link DFL-500 User Manual

Administration

This chapter describes how to use the DFL-500 web-based manager to administer and maintain the DFL-500.
It contains the following sections:
·

Logging into the web-based manager

·
System status
· Upgrading the DFL-500 firmware
·
Manual antivirus database updates
·
Manual attack database updates
·
Displaying the DFL-500 serial number
· Backing up system settings
·
Restoring system settings
·
Restoring system settings to factory defaults
·
Restarting the DFL-500
·
Shutting down the DFL-500
·
System status monitor
·
Automatic antivirus and attack database updates
·
Network configuration
· Configuring the internal interface
· Configuring the external interface
·
Configuring the management interface (Transparent mode)
·
Setting DNS server addresses
·
Configuring routing
· Enabling RIP server support
·
Providing DHCP services to your internal network
·
System configuration
·
Setting system date and time
· Changing web-based manager options
·
Adding and editing administrator accounts
·
Configuring SNMP
·
Alert email
Logging into the web-based manager
You require:
·
A computer with an ethernet connection
·
Internet Explorer version 4.0 or higher
·
A crossover cable or an ethernet hub and two ethernet cables
To connect to the web-based manager:
·
Make sure the computer from which you are going to connect to the web-based manager is correctly
configured on the same network as the DFL-500 interface to which you are going to connect.
· If the DFL-500 is running in NAT mode, connect to an interface that is configured for HTTPS
management
DFL-500 User Manual
107