Configuring A Windows 98 Client For Pptp - D-Link DFL-500 User Manual

Sample PPTP range configuration

Configuring a Windows 98 client for PPTP

Use the following procedure to configure a client machine running Windows 98 so that it can connect to a
DFL-500 PPTP VPN. To configure the Windows 98 client, you must install and configure windows dial-up
networking and virtual private networking support.
Installing PPTP support
·
Go to Start > Settings > Control Panel > Network .
·
Select Add.
·
Choose Adapter.
·
Select Add.
·
Select Microsoft as the manufacturer.
·
Select Microsoft Virtual Private Networking Adapter.
·
Select OK twice.
· Insert diskettes or CDs as required.
·
Restart the computer.
Configuring a PPTP dial-up connection
·
Go to My Computer > Dial Up Networking .
·
Double-click Make New Connection.
· Name the connection and select Next.
·
Enter the external IP address or hostname of the DFL-500 to connect to and select Next.
·
Select Finish.
An icon for the new connection appears in the Dial-up networking folder.
· Right-click the new icon and select Properties.
·
Go to Server Types.
·
Uncheck IPX/SPX Compatible.
·
Select TCP/IP Settings.
·
Turn off Use IP header compression.
·
Turn off Use default gateway on remote network.
DFL-500 User Manual
77