Front Panel Alphanumeric Character Entry - Agilent Technologies 34410A User Manual

2 Features and Functions
• If the multimeter is configured to take the measurement using an
• If either the ac voltage or ac current measurement function is selected,
• If the frequency/period measurement function is selected, pressing

Front Panel Alphanumeric Character Entry

When you are in the menus for storing instrument states (see
State Storage"
need to manually enter an alphanumeric character on the second display
line.
• To enter a number or character, press
• To quickly enter large numbers, you may press
44
aperture integration time, pressing
measurement operations will display APERTURE on the the main display
line and the current setting on the second display line (e.g. 101.005mSEC).
You can then use the navigation keypad to change the aperture setting.
Press to save the setting. If you wish to keep the previous setting,
press and do not save the changes.
pressing or
increase or decrease the bandwidth setting, and briefly display the new
setting on the second display line (e.g. if the setting was 20 HZ : MEDIUM,
the display will show 3 HZ : SLOW when you press
or will scroll through the selection of three bandwidth settings (3
HZ : SLOW, 20 HZ : MEDIUM and 200 HZ : FAST).
or during front panel measurement operations will increase or
decrease the gate time setting, and briefly display the new setting on
the second display line (e.g. if the setting was 0.1 GATE TIME, the display
will show 0.01 GATE TIME when you press
will scroll through the selection of gate time settings (0.001 GATE TIME, 0.01
GATE TIME, 0.1 GATE TIME and 1 GATE TIME).
on page 51), data logging and advanced triggering, you may
character (digit or letter) you wish to edit. The selected character will
flash to indicate it can be edited. Use the
digit (from 0 to 9) or a letter (from A to Z).
significant digit allowed and/or add leading zeros, instead of
incrementing the less significant digits up from zero. For non–zero
floating–point entries, you may also press
prefix (e.g. u, m, k, M), then use the
numerical entry.
The left and right arrow annunciators on the second display line will
indicate if there are editable characters left or right of the one selected.
during front panel measurement operations will
or
or during front panel
). Repeated use of
). Repeated use of
to select the displayed
and keys to modify a
to scroll over to the most
to scroll to the magnitude
and keys to change the
34410A/11A User's Guide
or
"Multimeter