Avaya G450 Configuration Manual page 27

3. Attach the mounting brackets to the G430, if applicable.
4. Replace the G430 in the rack or mount on the wall, if applicable.
5. Re-connect all cables (data and power) that you disconnected from the G430 and
6. Connect the G430 power cable into a mains socket.
7. Use the show platform mainboard CLI command to make sure the G430 is
Configuring V.150.1 on Avaya G450 and G430 Branch Gateway
• Three screws on the left side (see
its media modules, both front and rear.
working properly.
For example, when the G430 is working properly, output includes:
MAINBOARD BOARD
---------------
Type
Description
Serial Number
HW Vintage
HW Suffix
FW Version
No Fault Messages
When a VoIP module is successfully installed in the optional VoIP module slot,
output for the slot includes:
MEDIA SOCKET #2
------------------
Type
Description
Serial Number
HW Vintage
HW Suffix
Faults
When no VoIP module is installed in the optional VoIP module slot, the output for
the slot includes:
MEDIA SOCKET #2
------------------
Type
Description
Serial Number
HW Vintage
HW Suffix
Faults
Adding and removing the MP120 VOIP module
the figure
: G430
: Avaya Inc., G430 Media Gateway
: 08IS26191007
: 4
: F
: 29.18.0
: No Fault Messages
: MP80 VoIP DSP Module
: VoIP DSP resource with 80 channels
: 07IS15812717
: 0
: B
: No Fault Messages
: UNKNOWN
: UNKNOWN
: UNKNOWN
: UNKNOWN
: UNKNOWN
: NOT PRESENT
on page 22).
May 2014 27