Avaya G450 Configuration Manual page 17

2. Locate the MP160 module slot. The location differs depending on the hardware
Configuring V.150.1 on Avaya G450 and G430 Branch Gateway
• Use the short standoff For the G450 1.x.
• Use the long standoff for the G450 2.x.
version of the G450, see
page 17 and Figure 3: Location of DSP module slots in a G450 2.x
page 18.
Figure 2: Location of DSP module slots in a G450 1.x
Table 1: Figure notes:
1. MP20 or MP80 module slot
2. MP20,MP80 or MP160 module slot
3. MP20 or MP80 module slot
4. MP20, MP80 or MP160 module slot
Figure 2: Location of DSP module slots in a G450 1.x
Adding and removing MP160
on
May 2014
on
17