Avaya G450 Configuration Manual page 25

2. Locate the VoIP module slot (see
3. Position the VoIP module at a 45 degree angle to the main board, and start inserting
4. Push the module in all the way.
5. Flatten the module so it is flush with the main board.
6. Tighten the locking screw affixed to the VoIP module.
Configuring V.150.1 on Avaya G450 and G430 Branch Gateway
it into the VoIP module slot (see
Figure 9: Inserting a VoIP module into the VoIP module slot
Table 6: Figure notes:
VoIP module locking screw
Do not use too much force.
The latches at both sides click shut.
This secures the VoIP module to the motherboard.
Adding and removing the MP120 VOIP module
the figure on page 25).
the figure on page 25).
May 2014 25