Displaying System Information; Restoring Default Settings In Computer Setup; Closing Computer Setup; Computer Setup Menus - HP Pavilion HDX Entertainment Series Maintenance And Service Manual

Displaying system information

The following procedure explains how to display system information in Computer Setup. If Computer Setup
is not open, begin at step 1. If Computer Setup is open, begin at step 2.
1.
2.
3.

Restoring default settings in Computer Setup

The following procedure explains how to restore Computer Setup default settings. If Computer Setup is
not already running, begin at step 1. If Computer Setup is already running, begin at step 2.
1.
2.
3.
Computer Setup default settings are set when you exit Computer Setup and go into effect when the
computer restarts.
NOTE:
default settings.

Closing Computer Setup

You can close Computer Setup with or without saving changes.
●
●
After Computer Setup closes, the computer restarts in Windows.

Computer Setup menus

The menu tables in this section provide an overview of Computer Setup options.
NOTE:
computer.
Downloaded from www.Manualslib.com
To start Computer Setup, turn on or restart the computer, and then press
Based Setup" is displayed in the lower-left corner of the screen.
Access the system information by using the File menu.
To exit Computer Setup without changing any settings, use the arrow keys to select File > Ignore
Changes And Exit, and then follow the instructions on the screen.
To start Computer Setup, turn on or restart the computer, and then press
Based Setup" is displayed in the lower-left corner of the screen.
Select File > Restore Defaults, and then press enter.
Follow the instructions on the screen.
Your password, security, and language settings are not changed when you restore the factory
To close Computer Setup and save your changes from the current session, use either of the following
procedures:
Press f10, and then follow the instructions on the screen.
◦
– or –
◦ If the Computer Setup menus are not visible, press
the arrow keys to select File > Save Changes And Exit, and then press enter.
When you use the f10
you use the Save Changes And Exit procedure, Computer Setup closes when you press enter.
To close Computer Setup without saving your changes from the current session:
If the Computer Setup menus are not visible, press
arrow keys to select File > Ignore Changes And Exit, and then press enter.
Some of the Computer Setup menu items listed in this chapter may not be supported by your
manuals search engine
procedure, you are offered an option to return to Computer Setup. When
esc
f10 while "F10 = ROM
f10 while "F10 = ROM
esc to return to the menu display. Then use
to return to the menu display. Then use the
Computer Setup menus 85