Stihl MSA 160 T Instruction Manual page 49

Accessories
Only use those tools, guide bars, chains,
chain sprockets, accessories or
technically equivalent components that
have been approved by STIHL for this
machine. If you have any questions in
this respect, consult a servicing dealer.
Use only high quality tools and
accessories. Otherwise, there may be a
risk of accidents and damage to the
machine.
STIHL recommends the use of genuine
STIHL tools, guide bars, chains, chain
sprockets and accessories. They are
specifically designed to match your
model and meet your performance
requirements.
Drive
Battery
Observe the supplement sheet or
instruction manual for the STIHL battery
and keep in a safe place.
Further safety instructions – see
www.stihl.com/safety-data-sheets
Battery charger
Observe the supplement sheet for the
STIHL charger and keep in a safe place.
MSA 160 T
Before starting work
Before starting work in the tree, check at
ground level that the chain saw is safe to
operate – refer to appropriate chapters
in the Instruction Manual:
Functional chain brake, front hand
–
guard
Correctly mounted guide bar
–
Correctly tensioned chain
–
Trigger switch and trigger interlock
–
must move easily – switches must
return to initial position when
released
Trigger switch is locked when the
–
trigger interlock is not depressed
Never attempt to modify the controls
–
or safety devices in any way
Keep the handles dry and clean –
–
free from oil and dirt – for safe
control of the chain saw
Sufficient chain oil in the tank
–
Check contacts in the battery
–
compartment of the chain saw for
foreign matter and dirt
Fit the battery correctly – it must
–
engage audibly
Do not use defective or deformed
–
batteries
The chain saw should only be used if it
is in full working order – risk of accident!
Switching on the chain saw
Ensure a firm and secure footing. Hold
the chain saw securely.
Your chain saw is a one-person saw. Do
not allow other persons to be near the
running pole pruner.
Do not activate the trigger switch if the
saw chain is in a cut.
Switch on as described in the Instruction
Manual – see "Switching on the
machine".
During operation
When working in a tree, always secure
the tree surgery chain saw with a rope –
attach rope to the ring on the back of the
chain saw.
Always hold the
machine firmly
with both hands –
increased risk of
accident: right
hand on the con-
trol handle – even
if you are left-
handed. To ensure
reliable control,
wrap your thumbs
tightly around the
handlebar and
handle.
English
47