IBM s-series Installation And User Manual page 85

Table 18. Chassis status and temperature Information
This Field...
Chassis Type
Power
Power Supply
Fans
Fan <number>
<Fan status>
Displays...
This field displays the chassis type. for example:
v B08S
B16S
v
v -PREM indicates that the device is a premium device (supports full Layer 2
switching and full Layer 3 multiprotocol routing).
Indicates whether a power supply is installed in the specified power supply slot and
the status of the power supply, which can be one of the following:
OK - The power supply is functioning properly and supplying power to the chassis
and installed modules.
Failed - The power supply is not functioning and is not supplying power to the
chassis and installed modules.
This field also indicates:
v the manufacturing part number
v whether the supply is AC
v whether the supply is regular or POE
On the B08S, Power Supply 1 is the left-most slot, and Power Supply 4 is the
right-most slot. These numbers assume you are facing the front of the chassis, not
the rear.
On the B16S, Power Supply 1 is the top left-most slot, Power Supply 4 is the top
right-most slot, Power Supply 5 is the bottom left-most slot, and Power Supply 8 is
the right-most slot. These numbers assume you are facing the front of the chassis,
not the rear.
For the B08S, this field displays information about fans 1 through 6. Fan locations
are as follows:
v Fan 1 - Left-most fan in bottom row
v Fan 2 - Middle fan in bottom row
v Fan 3 - Right-most fan in bottom row
v Fan 4 - Left-most fan in top row
v Fan 5 - Middle fan in top row
v Fan 6 - Right-most fan in top row
For the B16S, this field displays information about fans 1 and 2. Fan locations are
as follows:
v Fan 1 - This is Fan A and is the right-most fan in the rear of the chassis.
v Fan 2 - This is Fan B and is the left-most fan in the rear of the chassis.
The status of a fan can be one of the following:
OK - The fan is functioning properly and is keeping the temperature of each module
within an acceptable temperature range.
Failed - The fan is not functioning properly or the fan control module cannot control
the fan.
Chapter 5. Managing the Chassis and Modules
59