Konica Minolta bizhub C284 Quick Assist Manual page 259

24
24 When a Message Appears to Replace Consuma-
bles or Carry Out Cleaning
When staples in the finisher have run out
When staples in the Finisher have run out, the following message appear.
Take action while referring to the label inside the machine.
d
Reference
For details on the replacement procedure when using the Finisher FS-535, refer to page 24-12 (only for
bizhub C554).
For details on the replacement procedure when using the Saddle Stitcher SD-512, refer to page 24-13 (only
for bizhub C554).
For details on the replacement procedure when using the Finisher FS-534, refer to page 24-14.
For details on the replacement procedure when using the Saddle Stitcher SD-511, refer to page 24-15.
For details on the replacement procedure when using the Finisher FS-533, refer to page 24-16.
24-2 bizhub C554/C454/C364/C284/C224