Q5. Can I Use A Magazine-Like Finish For A Copy Job - Konica Minolta bizhub C284 Quick Assist Manual

5
5.5

Q5. Can I use a magazine-like finish for a copy job?

A5. Yes, you can copy and staple the sheets of paper in their center like a magazine or catalog.
The original pages loaded are automatically arranged into an order appropriate for center binding, and the
2in1 function is activated to copy on both sides of the paper.
Tips
- To use the Center Staple & Fold function
– The Finisher FS-534 and Saddle Stitcher SD-511 are required.
– The Finisher FS-535 and Saddle Stitcher SD-512 are required (only for bizhub C554).
Operation procedure
1
Load the original.
2
Tap [Copy].
3
Tap [Application] and select [Booklet].
4
Tap [ON] and configure the respective items for print and bind operation.
Settings
[Left Bind]/[Right Bind]
[Fold/Bind]
[Paper]
[Original Size]
[Cover Sheet]
5
Tap [OK].
6
Press Start to start copying of the original.
5-12
Description
Select the binding position for the outputs.
Select [Center Staple & Fold]. This function staples copies at two places
along the center and folds the copies in half before feeding them out.
Select the paper tray where paper for copying is loaded.
Select the size of the original to be copied.
Use this option to copy the front and back covers onto separate paper
when copying an original with a front or back cover. When copying an orig-
inal without a front or back cover, you can use this function to have blank
sheets of paper inserted as the front and back covers.
Q5. Can I use a magazine-like finish for a copy job?
bizhub C554/C454/C364/C284/C224
5.5