Konica Minolta bizhub C284 Quick Assist Manual page 143

6
Fold
Half-folding, tri-folding, or Z-folding is enabled. This function is useful for direct mail and information notes.
Tips
- To use the Half-Fold or Tri-Fold function:
– The Finisher FS-534 and Saddle Stitcher SD-511 are required.
– The Finisher FS-535 and Saddle Stitcher SD-512 are required (only for bizhub C554).
- To use the Z-Fold function:
– The Finisher FS-535 and Z Folding Unit ZU-606 are required (only for bizhub C554).
Operation procedure
1
Tap [User Box], select a User Box, then tap [Open].
2
Select a file to print, then tap [Print].
% When more than one file is selected, you cannot change the finishing.
3
Tap [Finishing] and configure the respective items for finishing.
Settings
[Group/Sort]
[Offset]
[Staple/Punch]
6-10
[Group]
[Sort]
[Staple]
[Punch]
[Position Setting]
Q6. Can I print a saved file by changing its finishing?
Description
Enables outputs of more than one copy for each page.
Enables outputs of more than one copy for each set.
When the check box is selected, this setting ejects
paper by offsetting each lot of printouts for obvious
isolation.
Specify how to staple
Specify whether or not to create punch holes.
The number of punched holes varies depending on
the country you are in.
Select a desired staple or hole-punch position.
Specify [Auto], and the staple and punch positions are
automatically set according to the loading direction of
the original.
bizhub C554/C454/C364/C284/C224
6.6