Konica Minolta bizhub C284 Quick Assist Manual page 174

10.2 Q2. User authentication seems to be enabled on this machine. How can I be authenticated and allowed to operate this machine?
How to set: User authentication for Web Connection
1
Start a Web browser, enter the IP address of the machine in the URL field, then press the [Enter] key.
2
Enter the [User Name] and [Password] registered in this machine and click [Login]. When successfully
authenticated, you are allowed to operate Web Connection.
How to set: Getting authenticated as a user on a biometric or IC card authen-
tication unit
The following methods are used for biometrics or IC card-based authentication. When successfully authen-
ticated, you are allowed to operate this machine.
- [1-to-many authentication]
Place your finger on the Authentication Unit (biometric type) to get authenticated.
- [1-to-1 authentication]
Enter your user name, then place your finger on the Authentication Unit (biometric type) to get au-
thenticated.
- [Card Authentication]
Place your IC card on the Authentication Unit (IC card type) to get authenticated.
- [Card Authentication + Password]
Place your IC card on the Authentication Unit (IC card type), then enter your password to get authen-
ticated.
Tips
- The biometric authentication and Card authentication methods vary depending on the settings of the
Authentication Unit installed on this machine and those of this machine.
bizhub C554/C454/C364/C284/C224
10
10-7