Selecting The "Tx Operation" Menu; Specifying The Setting For "Scan Contrast - Konica Minolta FX-3 User Manual

Using the Utility Mode (Fax)

Selecting the "TX OPERATION" menu

1
Press the [Utility] key seven times.
"TX OPERATION" appears.
2
From the 10-Key Pad, press the key
([1] through [4]) for the "TX
OPERATION" function that you
wish to set.
H The "TX OPERATION"
functions are as follows:
1 SCAN CONTRAST
2 RESOLUTION
3 DEFAULT TX
4 HEADER
Tip
If, at any time, you wish to quit setting a "TX OPERATION" function,
press the [No] key. When the message "STOP SETTING?" appears,
press the [Yes] key to quit.

Specifying the Setting for "SCAN CONTRAST"

1
Select the "TX OPERATION".
H Refer to "Selecting the "TX OPERATION" menu" on page 6-37.
2
Press the [1] key from the 10-Key
Pad to select "SCAN CONTRAST".
3
Using the [ ] and [ ] keys, select
one of the five settings between
"LIGHT" and "DARK", and then
press the [Yes] key.
The "TX OPERATION" menu appears again.
Fax Kit (FX-3)
Ö
6
6-37