Toyota 2003 MR2 Spyder Owner's Manual page 76

03 07.07
SB13115
Type A
60
SB13114
Type B
CHILD RESTRAINT
INSTALLATION
Type A—
1. Widen the clearance between
seat cushion and seatback a little
and confirm the position of the low-
er anchorages below the tag in the
seatback.
2. Latch the hooks of lower straps onto
the anchorages and tighten the lower
straps.
Type B—
1. Widen the clearance between
seat cushion and seatback a little
and confirm the position of the low-
er anchorages below the tag in the
seatback.
2. Latch the buckles onto the anchor-
ages.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" on page 58.)
For the installation details, refer to the
instruction manual equipped
product.
2003 MR2 from Aug. '03 Prod. (OM17511U)
SYSTEM
the
the
with each