If You Cannot Shift The Sequential Manual Transmission Selector Lever - Toyota 2003 MR2 Spyder Owner's Manual

03 07.07
SB41067
3. Tighten the towing eyelet securely by
a wheel nut wrench.
CAUTION
When installing the eyelet on the ve-
hicle, be sure to tighten the eyelet
securely. If the eyelet is loose, it may
come off when being towed and re-
sult in death or serious injury.
If you cannot shift the
sequential manual
transmission selector lever
SD04002
In case the selector lever lock is not
released and the selector lever cannot
be moved even though the ignition
switch is turned to the "ON" position,
follow the procedures below:
1. Turn the ignition key to the "LOCK"
or "ACC" position. Make sure the
parking brake is applied.
2. Pry up the cover with a flat–bladed
screwdriver or equivalent.
SD04003
3. To push the link, insert a key or
screwdriver to the hole.
can be operated while the link is
being pushed.
4. Shift into the "N" position.
5. Re–insert the cover.
6. Start the engine while depressing the
brake pedal.
Be sure to have the system checked by
your Toyota dealer as soon as possible.
2003 MR2 from Aug. '03 Prod. (OM17511U)
The lever
181