Toyota 2003 MR2 Spyder Owner's Manual page 135

03 07.07
Fan speed selector
Turn the knob to adjust the fan speed—to
the right to increase, to the left to de-
crease.
Temperature selector
Turn the knob to adjust the temperature—
to the right to warm, to the left to cool.
G18021
Air flow selector
Turn the knob to select the vents used for
air flow.
1. Panel—Air flows mainly from the in-
strument panel vents.
2. Bi–level—Air flows from both the floor
vents and the instrument panel vents.
3. Floor—Air flows mainly from the floor
vents.
4. Floor/Windshield—Air flows
from the floor vents and windshield
vents.
Use with the air intake selector posi-
tioned in Fresh.
5. Windshield—Air flows mainly from the
windshield vents.
Use with the air intake selector posi-
tioned in Fresh.
For details about air flow selector settings,
see "Air flow selector settings" described
below.
Turning the air flow control knob to wind-
shield or floor/windshield position turns on
the defroster–linked air conditioning. At
this time, the "A/C" button indicator comes
on regardless of whether or not the "A/C"
button is pressed in. This is to clean up
the front view more quickly.
When the "A/C" button is not pressed in,
turning the air flow control knob to anoth-
er position turns off the air conditioning.
2003 MR2 from Aug. '03 Prod. (OM17511U)
mainly
115