Table of Contents
Advertisement
03 07.07
CAUTION
D
If the engine is not running, the
power assist for the brakes and
steering will not work so steering
and braking will be much harder
than usual.
D
Do not tow with a cable or chain
when the ignition switch is in the
"ON"
position
and/or
when
transmission is not in the neutral
gear position. Otherwise, you may
be involved in an unexpected acci-
dent.
226
—Installing towing eyelet
SB41065
the
1. Remove the towing eyelet cover on the
bumper, using a flat- bladed screwdriver
which is wrapped with a cloth.
SB41066
2. Use the towing eyelet in the tool bag.
Secure it to the hole on the bumper by
turning clockwise. (For the tool bag
storage location, see "—Required tools
and spare tire" on page 215 in this
Section.)
2003 MR2 from Aug. '03 Prod. (OM17511U)
Advertisement
Chapters
Table of Contents
