Toyota 2003 MR2 Spyder Owner's Manual page 125

03 07.07
1 2 3 4 5 6 (Preset buttons)
These buttons are used to preset and
tune in radio stations.
To preset a station to a button: Tune in
the desired station. (See "TUNE"
"SEEK".) Push and hold down the button
until you hear a beep—this will set the
station to the button. The button number
will appear on the display.
To recall a preset station: Push the button
for the station you want. The button num-
ber and station frequency will appear on
the display.
(Eject button)
Push the cassette tape eject button to
eject a cassette. Push the compact disc
eject button to eject a compact disc.
(Program)
Push " " to select the other side of a
cassette tape. The display indicates which
side is currently selected ("
or
top side, " " indicates bottom side).
Auto–reverse feature: After the cassette
player reaches the end of a tape side, it
automatically reverses and begins to play
the other side. This is true whether the
cassette was playing or fast forwarding.
(Reverse/Fast forward buttons)
Cassette Player
Push " " (preset button 6) to fast–for-
ward a cassette tape. "FF" will appear on
the display. Push " " (preset button 5)
to rewind a tape. "REW" will appear on
the display.
To stop the tape while it is fast–forward-
ing, push " " or "TAPE" button. To stop
the tape while it is rewinding, push "
or "TAPE" button.
If a tape rewinds completely, the cassette
player will stop and then play that same
side. If a tape fast–forwards completely,
the cassette will play the other side of the
tape using the auto–reverse feature.
Compact Disc Player
Push and hold "
" " (preset button 5) to fast forward or
" indicates reverse within a compact disc. When you
release the button, the compact disc play-
er will resume playing.
AM
Push "AM" to turn on the radio and select
the AM band. "AM" will appear on the
display.
AUDIO CONTROL (Tone and sound bal-
ance adjustment function)
Each time you
CONTROL" knob, the mode changes. To
adjust the tone and balance, turn the
knob.
BAS: Adjusts low–pitched tones. The dis-
play ranges from –5 to 5.
MID: Adjusts mid–pitched tones. The dis-
play ranges from –5 to 5.
TRE: Adjusts high–pitched tones. The dis-
"
play ranges from –5 to 5.
FAD: Adjusts the sound balance between
the front and rear speakers. The display
ranges from F7 to R7.
2003 MR2 from Aug. '03 Prod. (OM17511U)
" (preset button 6) or
push the "AUDIO
105