Toyota 2003 MR2 Spyder Owner's Manual page 277

03 07.07
Recommended viscosity:
SAE 5W–30
OIL008
Outside temperature
SAE 5W–30 is the best choice for good
fuel economy, and good starting in cold
weather.
If SAE 5W–30 oil is not available, SAE
10W–30 oil may be used. However, it
should be replaced with SAE 5W–30 at
the next oil change.
SOIL13
API service symbol
ILSAC certification mark
Oil identification marks
Either or both API registered marks are
added to some oil containers to help
you select the oil you should use.
The API Service Symbol is located any-
where on the outside of the container.
The top portion of the label shows the oil
quality by API (American
Institute) designations such as SL. The
center portion of the label shows the SAE
viscosity grade such as SAE 5W–30.
"Energy–Conserving" shown in the lower
portion, indicates that the
fuel–saving capabilities.
The ILSAC (International Lubricant Stan-
dardization and Approval Committee) Certi-
fication Mark is displayed on the front of
the container.
2003 MR2 from Aug. '03 Prod. (OM17511U)
Petroleum
oil has
207