Installing an Internal Tape Drive
Installing Backup Software
Installing Backup Software
Installing Driver Software
What Next?
2-14
Once the tape drive is installed correctly, you are ready to install tape
backup software from the HP SureStore Tape CD. The following software
and documentation are available:
For standalone systems, peer-to-peer systems, and Windows NT
workstations, HP Colorado Backup II and associated documentation are
provided on the HP SureStore Tape CD (T20i/e only).
For server systems, Replica Backup for HP SureStore Tape (T20i/e) or
Replica Single Server for HP SureStore Tape (T20Xi/Xe) and
associated documentation are provided on the HP SureStore Tape CD.
You can install other commercial backup applications if you want. For the
latest list of backup packages and drivers that support this tape drive, refer
to our World Wide Web site (http://www.hp.com/tape).
Windows 95 drivers are installed when you install the HP Colorado Backup
II software.
Windows NT users must install drivers separately. NT drivers are provided
on the HP Surestore Tape CD. Refer to the README file on the HP
SureStore Tape CD for the latest information on installing drivers.
Netware drivers are installed when you install the Replica software.
See Chapter 4 for details of how to operate and care for the drive. Make
sure you read the advice about choosing and caring for tape cartridges.