5 Locate an available 5¼-inch, half-height drive bay in your computer.
6 Remove the cover plate and any mounting hardware (screws, rails, or a
tray, for example) from the bay. Keep any mounting hardware that can be
used to secure the tape drive in the bay.
If your computer requires special mounting hardware that you do not have,
you must purchase this hardware before continuing.
7 Make sure the available SCSI connector reaches the back of the empty bay
in which you plan to install the new tape drive, as shown in figure 2.2.
8 Locate an available internal power cable and make sure it reaches the back
of the empty bay.
Installing an Internal Tape Drive
Preparing the Computer
2-5