Installing an Internal Tape Drive
Installing the Tape Drive in the Bay
Figure 2.7 SCSI cable connections
Terminator block
SCSI cable
Figure 2.8 Connecting the power cable and SCSI cable
Align the plastic
square on the cable's
connector with the slot
on the drive's
connector.
Power Cable
SCSI cable
Red stripe
2-10
3 Plug one of the computer's power cables into the back of the tape drive.
(See figure 2.8.)
Align the beveled edges of the computer's power connector with the
beveled edges of the drive's connector.
Insert it into the drive's power connector and press the connectors firmly
together.
Other internal
SCSI devices
Tape
drive
Red stripe
Connection to
SCSI controller