Allowing Imagereceiver To Be Used - Konica Minolta bizhub 350 User Manual

4
!
Detail
The Windows Security Alert message appears when ImageReceiver is
started under the following conditions.
- When Windows XP SP2 is installed when ImageReceiver is already in-
stalled
- When ImageReceiver is re-installed on a computer installed with Win-
dows XP SP2

Allowing ImageReceiver to be used

If [Keep Blocking] was clicked in the Windows Security Alert message, Im-
ageReceiver can no longer be used. In this case, follow the procedure de-
scribed below to allow ImageReceiver to be used.
1
Open Control Panel, and then double-click "Security Center", which
was installed with Windows XP SP2.
2
In the Windows Security Center dialog box, click "Windows Firewall".
3
In the Windows Firewall dialog box, click the Exceptions tab.
4
In the "Programs and Services" list, check that "MGS" with the Im-
ageReceiver program name is registered.
5
Select the "MGS" check box.
6
Click [OK].
!
Detail
The firewall setting can only be changed by a user with administrator priv-
ileges.
4-4
IP Scanner
200/250/350