Konica Minolta bizhub 350 User Manual page 228

Specifying management settings
– To specify the hex value, touch [HEX Selection], use the keypad or
touch [A] through [F] to specify the value, and then touch [Enter].
Software Switch Setting
Mode Selection
Bit Selection
HEX Selection
5
To change the setting for a different mode, repeat steps 3 and 4.
6
Touch [Enter] in each screen until the initial screen appears.
7
Turn the machine off, then on again.
Reminder
When turning the machine off, then on again, wait about 10 seconds after
turning the machine off before turning the machine on again.
200/250/350
Enter
000
00110000
( 76543210)
30
A B C
D E F Enter
Memory
Free
100%
7
7-15