2.11
SSL Setting Function
2.11.2
SSL Setting
0
For the procedure to access the Administrator Mode, see page 2-2.
0
Do not leave the machine with the Administrator Mode setting screen left shown on the display. If it is
absolutely necessary to leave the machine, be sure first to log off from the Administrator Mode.
NOTICE
When making the SSL Setting, be sure to make sure in advance that the device certificate has been registered
in the machine. For the procedure to register the device certificate, see page 2-30.
1
Start PageScope Web Connection and access the Administrator Mode.
2
Click the [Security] tab and [SSL/TLS Settings] from [PKI Settings] menu.
3
Click the pull-down menu of [SSL/TLS] and select [Enable].
Set "Encryption Strength" and click [Apply].
% For encryption strength, select the strong "AES-256, 3DES."
% In the Enhanced Security Mode, the setting cannot be changed to one containing strength lower
than AES/3DES.
bizhub C3850/C3350
2
2-32