Ic Card Owner Requirements - Konica Minolta bizhub C3350 User Manual

1.4 Precautions for Operation Control
- To use the IC card reader, it is necessary to install the loadable driver in the machine. For details, con-
tact your Service Representative.
- Only one IC card reader can be connected to the machine.
- No guarantee is given for correct operation, if the IC card reader is not connected to the machine when
the machine is turned ON or if it is removed and reinserted with the machine turned ON.
- Even if the IC card reader supports two or more types of IC cards, only one type of IC card can be used
for authentication. No guarantee is given for correct operation, if authentication is performed by using
two or more types of IC cards.
- No guarantee is given for correct operation in authentication with two or more types of IC cards simul-
taneously read by the IC card reader.
- SCL-010 is not covered by certification of ISO15408.

IC card owner requirements

The Administrator of the machine should make sure that operating rules that specify the following operations
exist within the organization and that the operations are implemented according to the rules.
- The person responsible within the organization that uses the machine should distribute the IC card is-
sued for use by the organization to a specific person who is authorized to own the IC card.
- The person responsible within the organization that uses the machine should prohibit the user from
transferring or lending the IC card to any third person and make sure that the user reports any lost IC
card.
- If only the IC card is used for user authentication, the person responsible within the organization that
uses the machine should make sure that only the authorized IC cards are used.
bizhub C3850/C3350
1
1-8