Introduction; Compliance With The Iso15408 Standard; Operating Precautions - Konica Minolta bizhub C3350 User Manual

1.1

Introduction

1 Security
1.1 Introduction
Thank you for purchasing our product.
This User's Guide contains the operating procedures and precautions to be used when using the security
functions offered by the bizhub C3850/C3350 machine. To ensure the best possible performance and effec-
tive use of the machine, read this manual thoroughly before using the security functions. The Administrator
of the machine should keep this manual for ready reference. The manual should be of great help in finding
solutions to operating problems and questions.
This User's Guide (Ver. 1.05) covers the following.
TOE Name
Controller Firmware

Compliance with the ISO15408 Standard

When the Enhanced Security Mode on this machine is set to [ON], more enhanced security functions are
available.
The security functions offered by the bizhub C3850/C3350 machine comply with ISO/IEC15408 (level: EAL3).

Operating Precautions

The machine gives an alarm message or an alarm sound (peep) when a wrong operation is performed or a
wrong entry is made during operation of the machine. (No "peep" alarm sound is issued if a specific sound
setting in Sound Setting of Accessibility Setting is set to [OFF].) If the alarm message or alarm sound is given,
perform the correct operation or make the correct entry according to the instructions given by the message
or other means.
The Administrator of the machine should not leave the machine with the setting screen left displayed after
the access to that mode is completed or in the middle of the mode. If it is absolutely necessary to leave the
machine, the Administrator of the machine should log off from the mode.
The Administrator of the machine should make sure that each individual general user logs off from the current
mode whenever the access to that mode is completed or if the user leaves the machine in the middle of the
mode with the mode screen left displayed.
NOTICE
This machine permits duplicate login operations performed by the service engineer, the Administrator of the
machine, and the user.
- The Administrator of the machine should make sure that, when the service engineer changes the set-
tings, neither the Administrator of the machine nor the user performs the login operation.
- The Administrator of the machine should make sure that no user is allowed to perform the login oper-
ation when the Administrator of the machine changes or deletes user information or user data.
- To prevent settings of the machine from being duplicated, the Administrator of the machine should not
attempt to change the settings in a condition of having logged onto a mode simultaneously from the
control panel and the client PC.
bizhub C3850/C3350
bizhub C3850/bizhub C3350/ineo
A3GN30G0142-999
+ +
3850/ineo 3350 Control Software
1
1-2