Mitsubishi FX3U-64CCL User Manual page 60

FX -64CCL User's Manual
3U
•Example 2 for the master station settings
- When the setting of the 64CCL is the single setting, please set up the master station as a Ver.1
intelligent device station. When the setting of the 64CCL are the double setting, the quadruple
setting, or the octuple setting, please set up the master station as a Ver.2 intelligent device station.
b) Set the station number, number of occupied stations/expanded cyclic transmission and transmission
rate/hardware test for the 64CCL.
Item
Station number
Number of occupied stations
/ expanded cyclic setting
Transmission rate /
hardware test setting
Number of remote points and
number assignment
The number of points and
assigned numbers
determined by the number of
occupied stations/expanded
cyclic transmission setting.
54
64CCL settings "A" for station number 1
No. 1 (rotary switch)
4 stations / double
Align the transmission rate setting to match the setting in the master station.(rotary switch)
Number of remote points and numbers for "4 stations/
double"
Remote input: RX00 to CF (208 points) User area
Remote input: RXD0 to DF (16 points) System area
are
Remote output: RY00 to CF (208 points) User area
Remote output: RYD0 to DF (16 points) System area
Remote register: RWr 00 to 1F (32 points) for write
Remote register: RWw 00 to 1F (32 points) for read
8.1 System configuration
64CCL settings "B" for station number 5
No. 5 (rotary switch)
2 stations / single
Number of remote points and numbers for "2 stations/
single"
Remote input: RX00 to 2F (48 points) User area
Remote input: RX30 to 3F (16 points) System area
Remote output: RY00 to 2F (208 points) User area
Remote output: RY30 to 3F (16 points) System area
Remote register: RWr 00 to 07 (8 points) for write
Remote register: RWw 00 to 07 (8 points) for read
8 Program Example