Introduction; Outline; External Dimensions And Part Names - Mitsubishi FX3U-64CCL User Manual

FX -64CCL User's Manual
3U
1.

Introduction

1.1

Outline

The CC-Link interface block FX
the FX /FX
3G 3U
The 64CCL works as an intelligent device station on a CC-Link network.
Only one 64CCL unit can be connected to a single programmable logic controller main unit.
• Compatible with CC-Link Ver. 2.00 and Ver. 1.10
The 64CCL is compatible with CC-Link Ver. 2.00, and enables expanded cyclic transmission to facilitate
the handling of applications requiring multiple data processing.
Ver. 1.10 is also supported by the 64CCL.
• When accessing the FX
GX Developer (Ver. 8.72A or later) is required. Access is carried out by the QCPU (Q mode) connected to
the FX /FX
3U
1.2

External Dimensions and Part Names

2-φ4.5 mounting holes
[1] [2] [3]
FX -64CCL
3U
4(0.16")
55(2.17")
[1] Extension cable
[2] Direct mounting hole: 2 holes of 4.5 (0.18") (mounting screw: M4 screw)
[3] POWER LED (green)
[4] Status LEDs
[5] Name plate
[6] DIN rail mounting groove (DIN rail: DIN46277, 35mm (1.38") width)
[7] DIN rail mounting hook
[8] Power supply terminal block
[9] Extension connector
[10] CC-Link connection terminal block
[11] Number of occupied stations and expanded cyclic setting switch
[12] Transmission rate setting switch
[13] Station number setting switch
12
-64CCL (hereinafter called 64CCL) is a special function block to connect
3U
/FX Series programmable logic controller to a CC-Link network.
3UC
/FX main unit from another station QCPU (Q mode) with
3U 3UC
main unit via CC-Link.
3UC
[4]
RUN
ERR.
L RUN
L ERR.
SD
RD
POWER
Without top cover
[5] [8]
[6]
STATION
NO.
COM
SETTING
[7]
9(0.36")
[13] [12]
87(3.43")
Unit: mm (inches)
MASS (Weight): 0.3kg (0.66lbs)
Accessories: Label for indication of
special unit/block number,
Dust Proof sheet,
Manual supplied with product
Refer to Section 1.4
[9]
10 1
X X
B RATE STATION
[10]
[11]
1 Introduction
1.1 Outline