Nokia RM-42 Service Manual page 264

Nokia Customer Care
Steps
1. Open the lock pins by spreading them outwards from the shield lid.
2. Carefully pick the shield lid up and move it to the antenna pads' direction.
3. Bend one of the lock pins and the area around it (see the following two figures) 90 degrees up to the same
level as the shield lid. But beware that the shield itself will not bend!
Page 7–56
Figure 71 Opening the lock pins
Figure 72 Bending the lock pin and the area around it
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
RF Troubleshooting and Manual Tuning Guide
RM-42
9241872 (Issue 1)