Nokia RM-42 Service Manual page 224

Nokia Customer Care
• WCDMA troubleshooting
i From Product/System Mode menu, choose "WCDMA" to Selected System Mode and click Write
ii From the Testing menu, activate the Tx Control window: Maintenance -> Testing -> WCDMA -> Tx Control .
iii In the Tx Control window:
• Select the Algorithm mode tab.
• Set Start level to "0" dBm (Default = "0").
• Set Step size, Step count and Sequence to "0" (Default = "0").
• Set Scrambling code class to "LONG" (Default = "LONG").
• Set Scrambling code to "16" (Default = "16").
• Set DPDCH Code number to "0", Code class to "2" and Weight to "15" (Defaults).
• Set DPCCH Code number to "0", Code class to "2" and Weight to "8" (Defaults).
• Set DPDCH enabled (Default).
• Set Channel to 9750.
Page 7–16
Figure 65 RF Controls window
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
RF Troubleshooting and Manual Tuning Guide
RM-42
9241872 (Issue 1)