Nokia RM-42 Service Manual page 254

Nokia Customer Care
2. From the Tuning menu choose WCDMA -> Rx Band Response Calibration.
3. Click Start and Tune.
4. Setup the signal generator to correspond the values in the pop-up window:
Frequency:
Level:
Modulation:
Deviation:
Modulation frequency:
5. Click OK.
6. Change frequency to 2166.6 MHz and click OK.
7. Check that the tuned values are within the limits specified in the table below:
Frequency compensation low
Frequency compensation high
Page 7–46 Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
RF Troubleshooting and Manual Tuning Guide
2113.4MHz
–48 dBm + cable and adapter attenuations
FM
500 kHz
50 kHz
Min
-5
-5
RM-42
Max
+5
+5
9241872 (Issue 1)