Nokia Customer Care
8.
Fill in the power level values (in dBm) to the Wide Range table.
9.
In the "Wide Range pane", click Calculate.
10. In the "High Burst" pane, click Tune.
11. Setup the spectrum analyzer with the following settings:
Center frequency:
Span:
Reference level offset:
Reference level:
Input attenuation:
Resolution bandwidth:
Video bandwidth:
Sweep time:
Detector:
Average:
Trigger:
Trigger level:
Marker:
Marker step:
Page 7–50
Company Confidential
Copyright ©2005 Nokia. All Rights Reserved.
RF Troubleshooting and Manual Tuning Guide
1950 MHz
0 Hz
Cable attenuations + adapter attenuation
24 dBm
Automatic
5 MHz
5 MHz
20 ms
RMS detector
No
Video
0 dBm
250 us
500 us
RM-42
9241872 (Issue 1)