Page 3
Nokia operates a policy of continuous development. Nokia reserves the right to make changes and improvements to any of the products described in this document without prior notice. Under no circumstances shall Nokia be responsible for any loss of data or income or any special, incidental, consequential or indirect damages howsoever caused.
Page 6
RM-609 ESD protection ESD protection Nokia requires that service points have sufficient ESD protection (against static electricity) when servicing the phone. Any product of which the covers are removed must be handled with ESD protection. The SIM card can be replaced without ESD protection if the product is otherwise ready for use.
Page 8
Our policy is of continuous development; details of all technical modifications will be included with service bulletins. While every endeavour has been made to ensure the accuracy of this document, some errors may exist. If any errors are found by the reader, NOKIA MOBILE PHONES Business Group should be notified in writing/e- mail. Please state: •...
CS speech or CS video (max. 64 kbit/s). The HSDPA peak is 3.6 Mbit/s downlink (with limited use cases). In PS/CS mode, RM-609 supports DTM Class with multi slot class 11 (max. 4 RX + 3TX, sum 5). With EGPRS this means maximum download speed of up to 236.8 kbit/s simultaneously with speech.
Page 19
• Nokia XpressPrint – direct printing via USB (PictBridge), Bluetooth (BPP), and WLAN (UPnP), from memory card or via online printing Store • 8 GB internal user memory • Nokia XpressTransfer – easy to transfer and organize photos and video between your device and a compatible PC • Nokia Lifeblog (mobile & PC) Music •...
Page 20
• Nokia 3.5 mm AV connector • 2.0 mm DC connector Add-on software framework • Symbian 9.2 OS • Nokia Series 60, 5th edition, feature pack 2 • Java: MIDP2.1 • C++ and Java SDKs • Flash Lite 4.0 Additional technical specifications •...
The table below gives a short overview of service devices that can be used for testing, error analysis, and repair of product RM-609. For the correct use of the service devices, and the best effort of workbench setup, please refer to various concepts.
The table below gives a short overview of service devices that can be used for testing, error analysis, and repair of product RM-609. For the correct use of the service devices, and the best effort of workbench setup, please refer to various concepts.
Page 36
Nokia battery types BL-5K, BV-4D, BL-4D, BP-4L. SRT-6 Opening tool SRT-6 is used to open phone covers. Note: The SRT-6 is included in the Nokia Standard Toolkit. SS-210 Camera removal tool The camera removal tool SS-210 is used to remove/attach the camera module from/to the socket.
The table below gives a short overview of service devices that can be used for testing, error analysis, and repair of product RM-609. For the correct use of the service devices, and the best effort of workbench setup, please refer to various concepts.
Note: You may alternatively use a known good FM radio broadcast as a test signal. 2. Attach the Nokia headset to the phone’s AV connector. 3. Use Scroll button to autotune to the radio frequency. 4. Set volume to suitable level.
• When certificate restoring for BB 5 products or IMEI rebuild for DCT-4 products is performed, existing data from Nokia System is programmed in the phone. The phone will be in the same condition as it was when it left the factory for the first time.
Page 108
5. Product code shown on the UI does not matter, because during restoring it will be replaced by the product code which is the latest one stored in Nokia system. 6. It is recommended to perform "Restore"-function without selecting "Flash Product"-option to avoid possible SW downgrade which causes the phone to die.
Page 109
RM-609 BB Troubleshooting and Manual Tuning Guide 7. Information from phone and Smart Card are read and connection to Tucson server is established. 8. Information from Nokia system is retreived and programmed in the phone. Issue 1 COMPANY CONFIDENTIAL Page 3 – 61...
Nokia System, and programmed in the phone. • After successful change, phone specific information in Nokia systems will match the new variant, and it can be used for e.g. certificate restoring. If you perform several product code changes, Nokia system will always be up to date with the latest successful event.
Page 119
4–17 VDCDCA (Vlow) level ..........................4–18 level..............................4–18 RF tuning and testing ............................4–20 RF auto tuning and testing with Nokia Care Suite..................4–20 RF auto tuning procedure ..........................4–20 Automatic RF testing with Nokia Care Suite....................4–25 Troubleshooting with Testing And Tuning Tool ..................
RF components have been changed or memory (D3000) is corrupted. RF shield cans Once a peel-off type RF shield can is opened, a repair lid (Nokia code 9501325) should always be installed. RF shielding does not work at all if RF shield cans are left open.
RF components are changed or memory (D3000) is corrupted. RM-609 can be tuned automatically. Auto tuning is designed to align the phone's RF part easily and faster. It performs calibrations, tunings and measurements of RX and TX. The results are displayed and logged in a result file, if initiated.
Page 137
RM-609 Cellular RF troubleshooting Nokia Care Suite application. The following window opens: Start Nokia Care Suite version. Note: The window appearance may differ depending on the Fuse, Multi Software Updater, Product Support Tool For Store and Testing And Tuning Tool Note: are Care Suite add-on applications.
Page 138
RM-609 Cellular RF troubleshooting If the application is able to find a connected phone, the following view will open: Nokia Care Suite and Testing And Tuning Note: The window appearance may differ depending on the Tool versions Click on the RF Tuning button. The following view opens:...
Page 139
Select Cellular RF Tunings and Tests from the drop-down menu. Select the RF cable used (and possible RF splitter / RF shield box) from the drop-down menu. CA-128RS attenuation values are always taken automatically into account when RM-609 product is connected to Nokia Care Suite tool.
RM-609 Cellular RF troubleshooting Nokia Care Suite and Testing And Tuning Note: The window appearance may differ depending on the Tool versions Automatic RF testing with Nokia Care Suite Testing And Tuning Tool add-on application can be used also for non-signalling RF tests. The automatic RF...
RM-609 Cellular RF troubleshooting Nokia Care Suite and Testing And Tuning Note: The window appearance may differ depending on the Tool versions. RF Testing selection does all the same measurements as RF Tuning , but does not perform any tunings.
Optional step (not needed if WCDMA TX activation only required): Check the basic TX parameters using a communication analyzer (for example CMU–200). Note: RM-609 WCDMA TX power classes: WCDMA I, IV, V and VIII class 3 (maximum output power +24 dBm), WCDMA II class 4 (maximum output power +21 dBm). Page 4 – 32...
Any particles inside the cavity between the protection window and lens have most probably been trapped there in the assembly phase at a Nokia factory. Unauthorized disassembling of the product can also be the root of the problem. However, in most cases it should be possible to remove the particle(s) by using clean compressed air.
Figure 41 Blade battery connector Charging The phone is charged through the 2 mm Nokia standard interface charger plug. Charging is controlled by dynamo charging IC BQ24156 (N3323). Dynamo charger detection is handled by EM ASIC (N2200) and external components are needed to protect the baseband module against EMC, reverse polarity and transient frequency deviation.