(2) Half-sunk table
4 x ø3.4 on the bottom surface, depth 20
(Drill a hole at the time of set-up).
Installing position of stopper for drawed
(On the reverse side)
JUKI logotype
Measure detailed drawing (2:1)
4-10.5 hole, depth 26, spot facing depth 3.5
Type: Helvetics Reg. Condensed
Condensed: Voided letters
Thickness: 1.5
Thickness: 0.8
Thickness: 0.5
Thickness: 1.5
2 x ø3.4, on the bottom surface, depth 10
(Drill a hole at the time of set-up)
X-X
Y-Y (3-places)
Z-Z (4-places)
– 158 –
17 drilled
hole
Part No. : 13429808