Drawing Of Table - JUKI MF-7800D Series Engineer's Manual

8. DRAWING OF TABLE

(1) Top mount type
4 x ø3.4 on the bottom surface, depth 20
(Drill a hole at the time of set-up).
Installing position of stopper for drawed
(On the reverse side)
JUKI logotype
Measure detailed drawing (2:1)
Type: Helvetics Reg. Condensed
Condensed: Voided letters
Thickness: 1.5
Thickness: 0.8
Thickness: 0.5
Thickness: 1.5
– 157 –
17 drilled
hole
2 x ø3.4, on the bottom surface, depth 10
(Drill a hole at the time of set-up)
Y-Y (3-places)
Z-Z
Part No. : 13429907