Adjusting And Setting Sc-510 - JUKI MF-7800D Series Engineer's Manual

(18) Adjusting and setting SC-510

1. When SC-510 is used, install the motor referring to the Instruction Manual for SC-510.
2. Installation of the synchronizer
1) Synchronizer
low.
2) Using two setscrews
plate on the sewing machine. Then, install
synchronizer
3) Fix a cord of synchronizer
plate by means of cable clip band
cord in the illustrated position, using cord clamp
and setscrew
– 50 –
can be installed by the method be-
, mount synchronizer fixing
on it.
to synchronizer fixing
.
. Fasten the