Installing The Switch - HP flexnetwork 5510 hi series Installation Manual

Installing the switch

CAUTION:
Keep the tamper-proof seal on a mounting screw on the chassis cover intact, and if you want to open
the chassis, contact HPE for permission. Otherwise, HPE shall not be liable for any consequence.
Figure 1 Hardware installation flow
Select and install power
supplies
Start
Install the switch
Ground the switch
Yes
Hot-swap power
supplies?
No
Connect power cords
Verify the installation
Turn on the circuit breaker
Operating correctly?
Yes
No
Hot-swap cards?
Yes
Install interface cards
Operating correctly?
Yes
Install transceiver modules
and cables
End
Troubleshoot the switch
No
Turn off the circuit
breaker
No
Troubleshoot the switch
6