Accessing The Switch For The First Time; Setting Up The Configuration Environment; Connecting The Console Cable - HP flexnetwork 5510 hi series Installation Manual

Accessing the switch for the first time

Setting up the configuration environment

You can access the HPE 5510 HI switch through the serial console port or the mini USB console port.
As a best practice, use the serial console port to access the switch. To access the switch through the
mini USB console port, you need to prepare a mini USB console cable.
Only the mini USB console port takes effect if you connect both the serial console port and mini USB
console port.
Figure 33 Connecting the console port to a PC

Connecting the console cable

A console cable is an 8-core shielded cable, with a crimped RJ-45 connector at one end for
connecting to the console port of the switch, and a DB-9 female connector at the other end for
connecting to the serial port on the console terminal.
Figure 34 Console cable
A side
Pin 9
Pin 1
Table 8 Console port signaling and pinout
RJ-45
1
2
A
Signal
RTS
DTR
Main label
DB-9
8
6
28
B side
8
B
1
Signal
CTS
DSR