Qsfp+ Port - HP flexnetwork 5510 hi series Installation Manual

Product code
JD097C
JG081C
Figure 56 SFP+ DAC cable
(1) Connector
NOTE:
• The fixed SFP+ ports on the switch do not support the HPE X130 10G SFP+ LC LRM
Transceiver, HPE X130 10G SFP+ LC LH 80km Transceiver, and HPE X130 10G SFP+ LC ER
40km Transceiver.
• To guarantee the functionality of the SFP+ ports, use only HPE SFP/SFP+ transceiver modules
and SFP+ DAC cables.
• The SFP/SFP+ transceiver modules and SFP+ DAC cables available for the switch are subject to
change over time. For the most up-to-date list of SFP/SFP+ transceiver modules and SFP+ DAC
cables, consult your HPE sales representative or technical support engineer.
• For the specifications for the HPE SFP/SFP+ transceiver modules and SFP+ DAC cables, see
HPE Comware-Based Devices Transceiver Modules User Guide.

QSFP+ port

The LSWM2QP2P interface card provides QSFP+ ports. You can install the QSFP+ transceiver
modules in
Table 20 QSFP+ transceiver modules available for the QSFP+ ports
Produ
HPE
ct
description
code
HPE description
HPE X240 10G SFP+ SFP+ 3m DA Cable
HPE X240 10G SFP+ SFP+ 5m DA Cable
Table 20 and the QSFP+ DAC cables in
Central
wavelengt
h (nm)
(2) Pull latch
Table 21 in the QSFP+ ports.
Cable/fiber
Connecto
diameter
r
(µm)
59
Max transmission distance
3 m (9.84 ft)
5 m (16.40 ft)
Modal Max
bandwidth transmissio
(MHz × km) n distance