Table 27 100/1000Base-X SFP port LED description
MODE LED
status
Steady green (rate
mode)
Flashing yellow
(IRF mode)
SFP+ port LED
Table 28 SFP+ port LED description
SFP+ port LED
status
Steady green
Flashing green
Steady yellow
Flashing yellow
Flashing yellow (3 Hz)
Off
Management Ethernet port LEDs
The switch provides an ACT/LINK LED to indicate the operating state of the management Ethernet
port.
Table 29 Management Ethernet port LED description
Management Ethernet
port LED (ACT/LINK)
status
Green
SFP port LED
Description
status
A link is present on the port and The port is operating at 1000
Steady green
Mbps. The port LED fast flashes when the port is sending or
receiving data.
Flashing green
The port is sending or receiving data at 1000 Mbps.
A link is present on the port and the port is operating at 100
Steady yellow
Mbps. The port LED fast flashes when the port is sending or
receiving data.
Flashing yellow
The port is sending or receiving data at 100 Mbps.
Flashing yellow (3
POST has failed on the port.
Hz)
No link is present on the port.
Off
The MODE LED operates in IRF mode.
The port status LEDs on the switch work in conjunction to
indicate the IRF member ID of the switch. For example, if the
Off
LEDs for ports 1 to 5 are steady green and the other port LEDs
are off, the IRF member ID of the switch is 5.
Description
A link is present on the port and the port is operating at 10 Gbps.
The port is sending or receiving data at 10 Gbps.
A link is present on the port and the port is operating at 1 Gbps.
The port is sending or receiving data at 1 Gbps.
POST has failed on the port.
•
No link is present on the port.
•
The MODE LED operates in IRF mode.
•
The MODE LED operates in PoE mode (for PoE switches only.)
Description
The port is up.
64