HP flexnetwork 5510 hi series Installation Manual page 19

b. The other person aligns the oval holes in the front brackets with the mounting holes in the
front rack posts, and attaches the front mounting brackets with M6 screws (user supplied) to
the front rack posts.
Tighten the screws and make sure the front and rear mounting brackets have securely
attached the switch to the rack.
Figure 15 Mounting the switch in the rack (with the wide flange of the mounting brackets
inside the rack)
Figure 16 Mounting the switch in the rack (with the wide flange of the mounting brackets
outside the rack)
14