How To Load The Equipment Settings; My Timezero ™ Cloud Data Service; How To Save Settings Data To The Cloud - Furuno TZTL12F Operator's Manual

8.6

How to Load the Equipment Settings

You can load saved settings data from an appropriate media to this unit, and share
them with the NavNet TZtouch2 units in the NavNet network.
1. Put the appropriate media in the USB port or a slot in the SD Card Unit.
2. Open the home screen, then tap [Settings] - [Files] - [Restore Settings]. A list of
user settings stored on the card in the SD card unit or media in the USB port ap-
pears.
SDCARDRIGHT
3. Tap the file to load. A confirmation message appears.
4. Tap the [OK] button. The message "IMPORT SUCCEEDED" appears if the im-
porting was successful.
5. Tap the [OK] button.
6. Tap the close button to finish.
8.7 My TimeZero
With the TimeZero
TimeZero
3.01 or after). To use the TimeZero
create a TimeZero
8.7.1

How to save settings data to the cloud

Do as follows to save settings data to the cloud.
1. Open the home screen, then tap [Settings][General].
2. Tap [Login] at the SOCIAL NETWORK section and login to your TimeZero
count.
3. Tap "<" on the title bar to return to the [Settings] menu.
4. Tap [Files][Backup Settings in the Cloud]. If a message announces that there is
settings data in the cloud, tap the [OK] button to write over the settings data in the
cloud.
™
Cloud Data Service
™
cloud data service, you can share the settings data stored in your
™
cloud account with another NavNet TZtouch2 (requires software version
™
account.
™
cloud data service, connect to the internet and
8. FILE OPERATIONS
™
ac-
8-5