Furuno TZTL12F Operator's Manual page 248

FUSION section
Menu item
[Connect to Fu- Connect to your Fusion equipment.
sion]
[Fusion Auto Set to [ON] to allow this unit to control the Fusion volume.
Volume]
[Minimum Set the minimum speed threshold. Exceeding this
Speed] speed activates volume auto control.
[Maximum Set the maximum speed threshold.
Speed]
[Volume In- Set the amount of extra volume to output.
crease]
BROWSER INSTALLATION section
Menu item
[FAX30 Browser]
[FA30 Browser]
[FA50 Browser]
Others menu items
Menu item
[Chart Master Device]
[System ID]
[IP Address]
[Quick Self Test]
[Certification Mark]
[ServiceMan]
[Event Input
Configuration]
[Reset Default Set-
tings]
Description
Description
Show the Facsimile Receiver FAX-30 display.
Show the AIS Receiver FA-30 display.
Show the AIS Receiver FA-50 display.
Description
Set to ON to set this equipment as the chart master and share one System
ID and chart unlock code in the network.
The system ID for this device within the network.
IP address for this unit within the network.
Test the equipment.
Show the certification marks this equipment has received.
Requires login password. For the service technician only.
These menu items are not used.
Reset the system to default settings.
13. OTHER FUNCTIONS
Options (setting range)
0.0 kn to 19.9 kn
0.1 kn to 99.0 kn
10% to +50%
Option (setting range)
Option (setting range)
13-7