How To Export Points And Routes - Furuno TZTL12F Operator's Manual

8. FILE OPERATIONS
2. Tap [Export File Format].
3. Tap [TZD], [CSV] or [GPX].
[TZD]: For NavNet TZtouch2
[CSV]*: For use with NavNet 3D
*: The CSV format has the following export restrictions:
- 2,000 points maximum
- 200 routes (100 points per route) maximum
- 10,000 track points maximum
[GPX]: For use with PC plotter
4. Tap the close button to finish.
8.2

How to Export Points and Routes

This unit holds a maximum of 30,000 points and 200 routes. When the capacity for
points is reached, the oldest point is erased to clear space for new points. When the
capacity for routes is full, a new route cannot be created. If you need to save points
and routes permanently, save them to a media, following the procedure below.
1. Put a formatted USB flash drive in the USB port. For use of the SD Card Unit, put
a formatted micro SD card in either slot on the unit.
2. Open the home screen, then tap [Settings] - [Files] - [Export All Points & Routes].
3. Tap [SDCardRight] (or [SD CardLeft]) on the SD card unit, or [External] for USB
port. You are asked if you are sure to export points and routes.
4. Tap [OK]. The message "EXPORT SUCCEEDED" appears if the exporting was
successful.
5. Tap [OK].
6. Tap the close button to finish.
8-2